Pages

12/12/2020

Function of Series Booster

Function

  • The function of the Booster is to compensate voltage drop in the feeder. 
  • The booster is basically a DC series generator whose function is to inject certain voltage to feeder in order to compensate voltage drop in it. 
  • The DC series generator is mechanically coupled with DC shunt motor as shown in the figure.  
  • The DC shunt motor draws current from the supply mains and drives DC series generator at constant speed.
  • As the voltage drop in the feeder is proportional to load current, the booster is connected in series with the feeder.  
  • The booster injected voltage must be proportional to load current. 
  • The booster is a low voltage, high current generator working over linear portion of the voltage – current characteristics.


function-of-booster.png


Important Note

  • The voltage drop in the feeder is compensated by compound wound generator but the voltage drop of the feeder of different length is compensated by Booster.

You may also like :

Right of way ( ROW ) in the transmission line

Minimum clearance between transmission conductor and ground

Standard Alternating voltage in India

On which parameters the dielectric loss in the cable depends?

Which of the factors affecting skin effect?

 


No comments:

Post a Comment